Mine-Spec Workwear, Branded For Your Crew
Hi-vis coveralls, flame-retardant suits, conti-suits, safety boots, gloves and respiratory protection — cut for South African surface and underground conditions, embroidered with your mine's logo in-house, and issued on a managed replenishment programme.
Build Your Crew's Issue List
Open any item for fabric, standard and size details, then add sizes and quantities to your quote list — we'll price the whole issue in one go.
Your Mine's Identity, Stitched In-House
All branding is done at our Sunninghill facility — no outsourcing, no third-party delays, and consistent colour matching across every batch.
Embroidery
Logo on chest, back and sleeves with up to 12 thread colours. Dense stitch counts that survive industrial laundering.
5–7 day turnaroundReflective Print
High-visibility reflective transfer for mine names, section numbers and hazard wording on coveralls and jackets.
Class 2 reflectivityScreen & Heat Transfer
Durable plastisol screen printing and heat-transfer vinyl for large back prints, contractor logos and event wear.
Wash-tested 50 cyclesName & Number Tapes
Woven or printed name tapes, employee numbers and blood-group panels for issue control and emergency response.
Per-employee issue sheetsSpec & Size Run
Choose garments, colours and standards; we send a free size-run sample kit.
Branding Proof
Digital artwork proof plus a stitched sample for sign-off before production.
Production
Cutting, sewing and branding run in-house with in-line quality checks.
QC & Packing
Every unit inspected, folded and packed per employee or per section.
Issue & Replenish
Issue sheets delivered with stock, and scheduled replenishment thereafter.
Size Charts For Every Line
Measurements are body measurements, not garment measurements. When between sizes, size up for layering in winter shifts.
| Size | Chest (cm) | Waist (cm) | Inside Leg (cm) |
|---|---|---|---|
| XS | 86 – 90 | 72 – 76 | 74 |
| S | 91 – 96 | 77 – 84 | 76 |
| M | 97 – 104 | 85 – 92 | 78 |
| L | 105 – 112 | 93 – 100 | 80 |
| XL | 113 – 120 | 101 – 110 | 82 |
| 2XL | 121 – 128 | 111 – 120 | 84 |
| 3XL | 129 – 138 | 121 – 132 | 86 |
| 4XL – 5XL | 139 – 156 | 133 – 152 | 88 |
| Size | Chest (cm) | Sleeve (cm) | Back Length (cm) |
|---|---|---|---|
| S | 96 – 102 | 60 | 70 |
| M | 103 – 110 | 62 | 72 |
| L | 111 – 118 | 64 | 74 |
| XL | 119 – 126 | 66 | 76 |
| 2XL | 127 – 136 | 68 | 78 |
| 3XL – 5XL | 137 – 160 | 70 | 80 – 84 |
| UK | EU | Foot Length (cm) | Typical Use |
|---|---|---|---|
| 3 – 5 | 36 – 38 | 22.0 – 24.0 | Office, control room, stores |
| 6 – 8 | 39 – 42 | 24.5 – 26.5 | Plant & workshop crews |
| 9 – 11 | 43 – 46 | 27.0 – 29.5 | Shaft, development & surface |
| 12 – 14 | 47 – 49 | 30.0 – 32.0 | Special-order issue |
| Item | Sizing | Hand Circumference (cm) |
|---|---|---|
| Gloves | Size 8 | 18 – 20 |
| Gloves | Size 9 | 20 – 22 |
| Gloves | Size 10 | 22 – 24 |
| Gloves | Size 11 | 24 – 26 |
| Half-mask respirator | S / M / L | Face seal fit-test required |
| Hard hat | One size | 55 – 64 cm ratchet adjust |
| Fit Tips | Detail |
|---|---|
| Measure over base layers | Take chest and waist measurements wearing a normal shift shirt. |
| Between sizes | Size up — coveralls shrink 2–3% in the first three washes. |
| Inside leg | Standard 78 cm; short (72 cm) and long (84 cm) available at no extra cost. |
| Ladies' cut | Female-fit coveralls and conti-suits available in the same fabric and standards. |
| Sample kit | Free size-run kit sent before bulk orders — returned within 14 days. |
Materials That Survive The Shift
Every garment line is produced to a documented specification and tested against the applicable South African or EN standard. Test reports are issued with each bulk order.
| Fabric | Weight / Composition | Used On |
|---|---|---|
| Poly-Cotton Twill | 250 gsm · 65/35 | Hi-vis coveralls, vests |
| Ripstop Poly-Cotton | 300 gsm · 65/35 | Conti-suits, jackets |
| FR Cotton (Proban®) | 320 gsm · 100% cotton | Flame-retardant coveralls |
| Antistatic FR Blend | 290 gsm · 98/2 carbon grid | Coal & gas-area suits |
| PU-Coated Polyester | 190 gsm · 3000 mm WP | Storm jackets, wet-weather |
| PVC / Nitrile | 0.45 – 0.60 mm | Gumboots, gauntlets |
| Reflective Tape | 50 mm · glass bead & prismatic | All hi-vis lines |
| Standard | Covers | Our Lines |
|---|---|---|
| SANS 1486 | High-visibility warning clothing | Hi-vis coveralls, vests |
| SANS 1551 | Protective safety footwear | PRO-BOOT S3, gumboots |
| EN ISO 11612 | Protection against heat & flame | FR coveralls, conti-suits |
| EN 1149-5 | Antistatic properties | Coal & gas-area suits |
| EN 374 / EN 388 | Chemical & mechanical gloves | Nitrile gauntlets, cut-5 |
| EN 166 / EN 140 | Eye protection & respirators | Goggles, shields, P3 masks |
| EN 361 / EN 355 | Fall-arrest harnesses & lanyards | Full-body harness sets |
The Right Kit For Your Environment
Typical issue specifications we supply per sector — adjust colours, standards and branding to your mine's SHEQ requirements.
Gold & PGM Underground
Hot, wet, abrasive conditions with flame and fall-arrest requirements.
- FR cotton coverall with reflective bands
- S3 safety boot with heat-resistant sole
- Vented hard hat with chinstrap & lamp bracket
- Full-body harness for raise and stope work
Coal & Anthracite
Combustible dust and gas atmospheres demand antistatic, flame-retardant issue.
- Antistatic FR suit (EN 1149-5 / ISO 11612)
- P3 respirator for longwall and crusher dust
- Cut-5 impact gloves for conveyor work
- Anti-fog goggles with indirect venting
Quarries & Aggregates
High surface dust, moving plant and long exposure hours in the sun.
- Hi-vis coverall Class 2 reflectivity
- Executive vest for supervisors & visitors
- Dust mask range plus half-mask P3 option
- Steel-toe boots with scuff caps
Chemical Dosing & Water
Splash and vapour exposure during decanting, dosing and tank cleaning.
- Chemical-splash coverall (Type 4/5/6)
- 400 mm nitrile gauntlets, EN 374
- Face shield with browguard over goggles
- PVC steel-toe gumboots
Plant, Workshop & Stores
Heavy maintenance work with oil, grease, welding and lifting hazards.
- 300 gsm ripstop conti-suit, double knees
- Welding gauntlets and FR aprons
- Safety goggles and ear protection
- Chelsea safety boot for all-day wear
Logistics & Contractors
Visitor and contractor control, night work and rapid onboarding issues.
- Visitor vest packs in banded sizes
- Reflective bomber jacket for night shifts
- Storm jacket for open-pit and haul roads
- Branded kit bags for induction packs
Ordering Programmes That Scale
From a ten-man contractor crew to a full mine issue with per-shaft replenishment — pick the programme that matches your headcount.
Starter Issue
10 – 100 units- Free size-run sample kit
- Single-colour embroidery or print
- 7–10 working day turnaround
- Courier to any SA site
- Packed per size band
Mine Issue
100 – 1 000 units- Multi-colour embroidery plus reflective print
- Name & employee-number tapes
- Per-employee and per-section packing
- Issue sheets and size-breakdown reports
- Volume pricing with quarterly reviews
Contract Programme
1 000+ units / ongoing- Dedicated account manager & credit facility
- Held buffer stock in your sizes
- Monthly or shift-change replenishment runs
- Consolidated chemicals + PPE invoicing
- Annual SHEQ compliance reporting
800 Workers Kitted In Three Weeks
Full Mine Issue With Per-Shaft Branding
A single-shaft trial grew into a complete 800-employee rollout: hi-vis coveralls, conti-suits, boots, gloves, goggles and P3 respirators, each branded per shaft and section with employee numbers. Sizing was captured on site during shift change, sample kits issued first, and replenishment is now scheduled monthly against the stores' issue sheets — with chemicals supplied on the same delivery.
Make The Issue Last
Correct laundering keeps reflectivity, FR performance and fabric strength within specification for the full service life of the garment.
Separate colours, mild detergent, no hot cycles that break down reflective bonding.
Chlorine bleach destroys FR treatment; softeners coat reflective tape and reduce visibility.
Industrial laundering of FR garments must not use chlorine or starch-based products.
Retire garments when tape is cracked, peeling or faded below 50% of original reflectivity.
Replace hard hats after any significant impact, and harnesses after any fall-arrest event.
Perish immediately if perished, swollen, torn or showing breakthrough after chemical contact.
Documented, Tested, Auditable
Every MYLES WEAR™ line is produced to a written specification, batch-tested, and supplied with the applicable SANS or EN test documentation for your SHEQ file. Garments are labelled with size, care instructions, batch number and standard reference — so an inspector can trace any item back to its production run.
Questions Before You Order
What SHEQ officers, stores managers and procurement teams ask us most often.
Ten units per style for branded garments, and single units for unbranded stock lines such as gloves, goggles, respirators and boots. Sample kits are free of charge and returned within 14 days.
Embroidery and reflective print run 5–7 working days after artwork sign-off for standard volumes. Full mine issues of 500+ units typically complete in three weeks, including on-site sizing.
Yes. We thread-match to Pantone references, replicate your existing logo layout, and can mirror an incumbent supplier's specification so your issue looks identical to previous batches.
Hi-vis lines are produced to SANS 1486, footwear to SANS 1551, and FR lines to EN ISO 11612 with EN 1149-5 antistatic options. Test documentation is issued with each bulk order for your SHEQ file.
We capture sizes on site during shift change or work from your HR size register. A 5% size-exchange allowance is held back on every bulk order, and exchanges are processed within five working days.
Yes — most clients consolidate. PPE, workwear and process chemicals go out on one delivery schedule with one invoice and per-cost-centre reporting.
Replenishment runs are scheduled monthly against your issue sheets, and single-unit top-ups for leavers, new starters and damage replacements can be ordered at any time at contract pricing.
Ready To Kit Out Your Crew?
Send us your headcount, sizes and branding requirements — you'll have a sample kit, a stitched proof and a fixed quote within one business day.
Workwear & PPE Quote Request
Items in your quote list are attached automatically to your message.
Tell Us About Your Issue
Fields marked * are required.
Peltier Dr, Sunninghill, Sandton,
Gauteng, South Africa
Mon–Fri 07:30–17:00 · Sat 08:00–13:00
Send your logo artwork and size run straight to us
Sample kit: 2–3 days · Branded production: 5–7 days
Full mine issue: ±3 weeks · Top-ups: 48 hours